DS Series PBX Technical Reference And Installation Guide
111
XI.ARRANGEMENTS FOR INSTALLATION
XI.1. HOW TO CHOOSE THE PROPER LOCATION
FOR INSTALLATION
One of the most important stages in realizing the installation of an exchange of the DS200
series effectively is exploration of the site before the installation. Site inspection is essential
regarding effective use of installation team and duration, as well as determining exchange
devices and equipment, for which to place orders.
At that stage, a group of technical personnel gathers information about several topics related
to the installation process, by visiting the building where the installation site is located. Those
topics are explained in the following sections.
XI.1.A. SIZE OF THE ROOM IN WHICH THE
EXCHANGE IS TO BE INSTALLED:
The room where the exchange is to be installed must be so large that the rack or cabinet
units that are going to form the exchange, as well as the maintenance and computer table,
would fit in. Besides, there should be gaps around the cabinets (Applies for the cabinet-type
installations only), namely at least 1 m. at the left, right and rear, and at least 2 meters at the
front. That is essential regarding provision of sufficient space for work in comfort.
The diagram below illustrates layout of a room with the required distances indicated, which
houses a DS200 exchange of two cabinets.
Summary of Contents for DS200
