Kärcher KM 120/250 R LPG, Manual

Page: 22 / 472

-
4
 First switch off the appliance and re-
move the key before performing any
cleaning or maintenance tasks on the
appliance, replacing parts or switching
over to another function.
 Always disconnect the battery when
working on the electrics.
To do this, first disconnect the negative
terminal and then the positive terminal.
Reconnection is performed in reverse
sequence. Connect the positive termi-
nal first, then connect the negative ter-
minal.
 Do not clean the appliance with a water
hose or high-pressure water jet (danger
of short circuits or other damage).
 Maintenance work may only be carried
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety regula-
tions.
 Please observe the local safety regula-
tions regarding portable commercially
used appliances.
 Always use appropriate gloves while
working on the device.
The sweeper operates using the sweep-
shovel principle.
– The rotating roller brush moves the dirt
directly into the waste container.
– The side brush cleans the corners and
edges of the surface and moves dirt
and debris into the path of the roller
brush.
– The fine dust is sucked in via the dust
filter through the suction blower.

DANGER
Risk of personal injury or damage!
 Observe the weight of the appliance
when you load it!
 Do not use a fork lift, the appliance
could get damaged.

Use a suitable ramp or a crane to load
the appliance!

Observe when using a ramp:
Ground clearance 70 mm.

If the machine is delivered on a pallet,
you must create an unloading ramp us-
ing the boards provided.
You will find the instructions for this pro-
cedure on page 2 (inside of cover).
Important instruction : every board
must be attached with at least 2 screws.
Safety information concerning
maintenance and care
Function
Unloading tips
Net weight (transport weight) 851 kg*
* If upgrade kits are installed, the weight is
respectively higher.
22 EN