-
4
Illustration
1 Tank lid
2 Seat (with seat contact switch)
3 Steering wheel
4 Centrifugal separator
5 Lock of appliance hood
6 Cover
7 Side brush, right
8 Front wheel
9 Roller brush access
10 Lashing point
11 Nameplate
12 Beacon lamp
13 Appliance cover right side
14 Cover, right
15 Tail panel
16 Rear wheel
17 Cover, left
18 Bonnet left side (engine bonnet)
Illustration
1 Roller brush and side brush control le-
ver
Lever forwards: Switches the roller
brush on and lowers and switches the
side brushes on.
Lever backwards: Switches the roller
brush on
2 Control lever waste container
Raise/lower waste container
3 Roller brush control lever
Raises and lowers the roller brush
4 Control lever container flap
Open/close container lid
5 Indicator lamps and display
6 Switch blower and filter cleaning
Position centred: Filter cleaning and
blower off
Rear position: Blower on
Front position: Filter cleaning on
7 Horn switch
8 Fuses
9 Ignition lock
Filament symbol : Pre-heat
Position 0: Switch off engine
Position 1: Ignition on
Position 2: Start the engine
10 Motor speed adjustment
Gas lever
11 Parking brake
12 Roller brush wear adjustment / sweep-
ing area setting
Illustration
1 Brake pedal
2 Accelerator pedal forward / reverse
Illustration
1 Operating hour counter
2 Charge warning lamp
3 Oil pressure warning lamp
4 Cooling water temperature warning
lamp
5 Motor suction air
6 Warning lamp fuel reserve
7 Preglow indicator light
8 Indicator lamp (not connected)
Operating and Functional Elements
Illustration of sweeper
Operating field
Pedals
Indicator lamps and display
21
EN
Summary of Contents for KM 120/250 R D
