Telephone: 1 (450) 444-2030
•
Toll free: 1 (888) 222-1560
•
Fax: 1 (450) 444-2029
•
Internet: www.kantech.com
2006 Tyco Safety Products, Canada, Ltd. All rights reserved
•
Specifications may change without notice
page 3 of 39
DN1656
-
0606
Introduction
Before you start installing KT-NCC hardware, you have to determine the configuration that best corresponds
to your network architecture. This information is crucial for the good operation of the Kantech products that
you will install.
We suggest that you contact the Network Administrator of the site where you will install the KT-NCC so that
he can provide you with all network information that is essential for the good operation of the KT-NCC.
How to Proceed
First, determine the architecture of the site and the corresponding configuration scenario.
Next, you should:
•
assemble the network information required to configure the KT-NCC;
•
register and configure the KT-NCC in EntraPass Global Edition.
We have divided this manual so that, as soon as you determine the pertaining type of architecture and
environment, you can follow the configuration instructions that correspond to your environment before
connecting additional components.
