Telephone: 1 (450) 444-2030
•
Toll free: 1 (888) 222-1560
•
Fax: 1 (450) 444-2029
•
Internet: www.kantech.com
2006 Tyco Safety Products, Canada, Ltd. All rights reserved
•
Specifications may change without notice
page 17 of 39
DN1656
-
0606
4.
Select the
General
tab
:
•
Enter the
Number of controller loops
that connect to the KT-NCC. The system supports up to 7
loops (2 RS-485 loops, 1 RS-232 loop and 4 IP loops).
•
Configure the
KT-NCC Time Zone Configurations
•
When necessary, check the box
Automatically adjust clock for daylight saving changes
.
Note:
It is advisable to check with the Network Administrator if the site where you are installing the
KT-NCC is situated in an area where daylight saving time is in effect.
5.
Select the
Ethernet Port #1
tab.
•
Enter the
MAC Address
of the KT-NCC. (No. 2 in the diagram on page 12).
•
Check the box
Ethernet port #1
.
