Telephone: 1 (450) 444-2030
•
Toll free: 1 (888) 222-1560
•
Fax: 1 (450) 444-2029
•
Internet: www.kantech.com
2006 Tyco Safety Products, Canada, Ltd. All rights reserved
•
Specifications may change without notice
page 28 of 39
DN1656
-
0606
Configuring the KT-NCC in EntraPass Global Edition
1.
In the application EntraPass Global Edition - Workstation, open the Gateway window found under the
Devices
tab.
2.
From the
EntraPass Application
drop-down list, select the KT-NCC that you just saved in EntraPass.
3.
From the
Gateway(s)
drop-down list, select the KT-NCC gateway that you would like to configure.
•
You can rename the KT-NCC gateway in the
French
and
English
fields.
4.
Select the
General
tab
:
•
Enter the
Number of controller loops
that connect to the KT-NCC. The system supports up to 7
loops (2 RS-485 loops, 1 RS-232 loop and 4 IP loops).
•
Configure the KT-NCC
Time Zone Configuration
.
•
When necessary, check the box
Automatically adjust clock for daylight saving changes
.
Note:
It is advisable to check with the Network Administrator if the site where you are installing the
KT-NCC is situated in an area where daylight saving time is in effect.
