manualshive.com logo in svg

Kantech KT-NCC, Quick Configuration Manual, Page: 25 / 40

Share
Download
Kantech KT-NCC Quick Configuration Manual Download Page 25

Telephone: 1 (450) 444-2030 

•

 Toll free: 1 (888) 222-1560 

•

 Fax: 1 (450) 444-2029 

•

 Internet: www.kantech.com

2006 Tyco Safety Products, Canada, Ltd. All rights reserved 

•

 Specifications may change without notice

page 24 of 39

DN1656

-

0606

•

The blue pilot light (Vital LED) of the KT-NCC will blink once/second to signal that it is 
communicating with the server. 

Note: 

For details, refer to Flash Patterns of the LED Indicator on page 10

At this stage, the system checks if the version number of the software and controller are the same. If not, the 
system updates the KT-NCC firmware automatically. Three messages will appear on the list of messages of 
the EntraPass workstation to indicate that the update has been completed.

The messages to lookout for are:

•

KT-NCC Update of platform CE - KT-NCC, Started

•

KT-NCC Update of platform CE - KT-NCC, Completed

•

KT-NCC Update of platform CE - KT-NCC, Successfully completed.

Summary of Contents for KT-NCC









































Reviews:

No comments