Telephone: 1 (450) 444-2030
•
Toll free: 1 (888) 222-1560
•
Fax: 1 (450) 444-2029
•
Internet: www.kantech.com
2006 Tyco Safety Products, Canada, Ltd. All rights reserved
•
Specifications may change without notice
page 27 of 39
DN1656
-
0606
1.
Use needle nose pliers to remove jumpers
JP2
and
JP3
(see Figure 5: KT-NCC Connections Diagram
on page 9).
2.
Press
Reset
.
3.
Reinstall
jumpers JP2
and
JP3
.
Connecting the KT-NCC to the Network
1.
Connect the KT-NCC to the network via Ethernet port #1 of the KT-NCC. The KT-NCC will place a DHCP
request to obtain an IP address.
Registering the KT-NCC to the EntraPass Global Edition Server
1.
In the application EntraPass Global Edition - Workstation, open the Gateway window found under the
Devices
tab.
Note:
It is not necessary to contact the Kantech Technical Support department to register the KT-
NCC in EntraPass Global Edition.
2.
In the section
Optional or Additional System Components
, select
KT-NCC
.
3.
Click here to install component
. The list on the right will display the new KT-NCC preceded by a blue
dot.
4.
Select the new KT-NCC component from the list. The
Activate
button will activate.
5.
Click
Activate
to save the KT-NCC in EntraPass Global Edition.
•
The blue dot will change to green and the new KT-NCC controller will be added to the list of
components at the top of the screen.
•
The
Edit
button will activate to enable you configure the security options and rename the KT-NCC.
6.
Close the System registration window.
