Kantech KT-NCC Quick Configuration Manual Download Page 35

Page: 35 / 40

Telephone: 1 (450) 444-2030

•

Toll free: 1 (888) 222-1560

•

Fax: 1 (450) 444-2029

•

Internet: www.kantech.com



•

Specifications may change without notice

page 34 of 39

DN1656

0606

Registering the KT-NCC to the EntraPass Global Edition Server

In the application EntraPass Global Edition - Server, open the System registration window that is found
under the

Connection

tab.

Note:

It is not necessary to contact the Kantech Technical Support department to register the KT-

NCC in EntraPass Global Edition.

In the section

Optional or Additional System Components

, select

KT-NCC

Click here to install component

. The list on the right will display the new KT-NCC preceded by a blue

dot.

Select the new KT-NCC component from the list. The

Activate

button will be activated.

Click

Activate

to save the KT-NCC in EntraPass Global Edition.

•

The blue dot will change to green and the new KT-NCC controller will be added to the list of
components at the top of the screen.

•

The

Edit

button will activate to enable you to configure the security options and rename the KT-

NCC.

Close the System registration window.

Summary of Contents for KT-NCC









































Search results

Summary of Contents for KT-NCC

Reviews:

Related manuals for KT-NCC

Brands by name

Popular brands

Kantech KT-NCC, Quick Configuration Manual

Search results

Summary of Contents for KT-NCC

Reviews:

Related manuals for KT-NCC

Brands by name

Popular brands