Telephone: 1 (450) 444-2030
•
Toll free: 1 (888) 222-1560
•
Fax: 1 (450) 444-2029
•
Internet: www.kantech.com
2006 Tyco Safety Products, Canada, Ltd. All rights reserved
•
Specifications may change without notice
page 15 of 39
DN1656
-
0606
•
The
Port
number is already configured. It is advisable to always use the value
18710
by default.
7.
The fields in the section
Ethernet #2
are already configured. You do not have to change these
parameters.
8.
Click
Save Configuration to KT-NCC
. A message showing that the configuration is saved and that the
KT-NCC is reinitializing will appear on the screen.
9.
Click
Click here to return
. The main window of the KT-NCC Web Configuration tool will reappear on the
screen. Meanwhile, the KT-NCC will reset.
•
The blue pilot light (Vital LED) of the KT-NCC will blink quickly to signal that the controller is in
reset mode.
•
The blue pilot light (Vital LED) of the KT-NCC will remain lit for 15 seconds to signal that the
controller is in startup mode.
•
The blue pilot light (Vital LED) of the KT-NCC will blink 4 times to signal that the controller has
reset but it is not yet registered on the EntraPass server. (Hard reset mode
.)
Note:
For details, refer to Flash Patterns of the LED Indicator on page 10.
10.
Close the
KT-NCC Web Configuration
window.
11.
Disconnect the cable of Ethernet port #2.
12.
Connect the network cable on Ethernet port #1 of the KT-NCC.
