Kambrook KSB400, Instruction Booklet

Page: 30 / 44

29
Wipe the processing bowl lid with
a cloth to clean. Do not put the
processing bowl lid in dishwasher.
Do not use abrasive cleaners or
steel wool.
Using the Cube Cutter
Cleaning Accessory
After emptying the processed food
from inside the processing bowl, use
the cleaning accessory to assist in
removing food residue left on the
cube cutter blade after processing.
1. Assemble the cubic attachment
as described prior, except without
attaching the blade holder.
2. Put the assembled cubic
attachment without the blade
holder inside the processing bowl
by aligning the small groove
on the blade holder with the
vertical tab inside the processing
bowl near the handle (See Fig.
20). Make sure the blade holder
is level and sits securely in the
processing bowl.
Fig. 20
Fig. 19
NOTE:
In order to ensure the cap
does not loosen while processing,
firmly tighten by turning anti-
clockwise.
WARNING:
The masher
blade is sharp. Handle
with care.
Cubic Attachment
Before cleaning the cubic
attachment, turn the power off at the
power outlet and then remove the
power plug from the outlet. Remove
the Stick Mixer motor from the
processing bowl lid and cube cutter
shaft, disc, blade holder, and cube
cutter blade from the processing
bowl, following instructions on page
16 'To detach the Cubic Attachment'.
The cube cutter blade, disc, blade
holder, cube cutter shaft, and cube
cutter cleaning accessory can be
washed in warm soapy water, rinsed
and dried thoroughly or put in the
dishwasher for cleaning.
UNLOCK
LOCK