Kambrook KSB400, Instruction Booklet

Page: 18 / 44

17
Fig. 9
4. Carefully holding onto the plastic
part in the middle of the disc to
avoid contact with the sharp
stainless steel blade (See Fig.10),
pull the disc assembled to the
blade holder out and away from
the processing bowl.
Fig. 10
5. Pull the four locking clips away
from the blade holder edges to
unlock the disc from the blade
holder (See Fig. 11).
Fig. 11
6. Carefully holding only the plastic
part in the middle of the disc,
avoiding contact with the sharp
stainless steel blade, pull the disc
away from the blade holder
(See Fig. 12).
Fig. 12
7. Carefully remove the cube cutter
blade from the blade holder.
To do this, flip the blade holder
upside down over a benchtop
so that the protruding shaft faces
upwards and lightly tap on the
bench. The cube cutter blade
should fall onto the bench. If it
does not fall out, press lightly
on the two plastic corners to
disengage (See Fig. 13).
The cube cutter blade is now
removed for cleaning. Follow
the Care, Cleaning and Storage
instructions on page 29 for
instructions to use the cube cutter
cleaning accessory.
Fig. 13