Kambrook KSB400, Instruction Booklet

Page: 17 / 44

16
4. Remove the Food Pusher from the
feed chute. Place food inside the
feed chute and simultaneously
push food into the bowl with the
food pusher while pressing the
'ON' or 'TURBO' button.
NOTE:
After dicing each hard
food or root vegetable, before
moving to the next dicing task,
remove the processing bowl lid
and check for any foodstuffs
caught in the cube cutter blade.
If food is caught in the blade,
see 'Using the Cube Cutter
Cleaning Accessory' section
on page 29 to clean the blade
before dicing again.
WARNING:
Never push
food into the feed chute
with your fingers or other
utensils. Always use the
food pusher provided.
5. When processing has finished,
switch OFF the motor by releasing
the ‘ON’ or ‘TURBO’ speed
button, switch off at the power
outlet and remove the power
plug from the outlet.
6. Release the Stick Mixer motor
from the processing bowl lid
and remove the lid from the
processing bowl following the
instructions on page 22 under
section 'To Detach the Stick
Mixer Motor and Processing Bowl
Lid'. Carefully remove the cubic
attachment as described below
and use a spatula to scrape off
any attached foodstuffs back
into the processing bowl.
7. Remove the foodstuffs from inside
the processing bowl using a
spatula.
8. Clean the food processor bowl
and cubic attachments as per
the Care, Cleaning and Storage
Instructions on page 28.
To Detach the Cubic Attachment
WARNING: Ensure the
‘ON’ or ‘TURBO’ speed
button is released, power
is turned off at the power
outlet and the power
plug is removed from the
outlet before detaching
the Stick Mixer motor from
the processing bowl lid.
1. With the Stick Mixer motor
unplugged from the outlet, press
the two ‘Release’ buttons found
at the drive end of the Stick Mixer
motor to eject the motor from the
processing bowl lid. Pull the motor
away from the processing bowl lid
to detach.
2. To remove the processing bowl lid
from the processing bowl, press
downwards on the lid release
button found on the handle of
the processing bowl and twist the
lid clockwise to unlock. Pull the lid
away from the processing bowl.
3. Pull the cube cutter shaft out of
the assembled cubic attachment
(See Fig. 9).
Operating Your Kambrook Stick Mixer
Continued...