Kambrook KSB400, Instruction Booklet

Page: 16 / 44

15
Fig. 7
6. Place the lid on the processing
bowl so that the small tab on
the lid sits just left of the handle
on the processing bowl. Press
downwards on the lid release
button found on the handle of
the processing bowl to release
and twist the lid anti-clockwise so
the ‘ ’ symbol on the lid is directly
above the ‘ ’ symbol on the lid
release button. Make sure the tab
on the lid sits inside the lid release
button and the lid is secure
before using.
NOTE:
The lid will only sit properly
on the bowl when the tab is in the
correct starting position.
7. To attach the Stick Mixer motor,
align the lock buttons on the drive
end of the Stick Mixer motor with
the grooves at the top of the
processing bowl lid. Push down to
lock into place until an audible
"click" can be heard to indicate it
is secure (See Fig. 8).
Fig. 8
8. Put the Food Pusher inside the
feed chute on the processing
bowl lid.
Using the Cubic Attachment
HINT: Before dicing, organise
ingredients in terms of soft or
hard foods. It is recommended
to dice soft foods such as,
strawberries, kiwi fruit, boiled
eggs, or zucchini first. Then dice
hard foods, which includes
uncooked root vegetables such
as pumpkin, carrots, potatoes,
beetroot or parsnip.
Ensure the cubic attachment is
completely and correctly assembled
as detailed prior.
1. Insert the power plug into a 230V
or 240V power outlet and turn the
power on.
2. Make sure food to be diced
are of a suitable size to be fed
through the feed chute.
3. Using the Variable Speed Control
Dial located at the top of the
Stick Mixer motor, start by setting
the dial to a low speed setting
and then, if required adjust to a
higher speed setting depending
on what the recipe suggests.