Kaleidescape Part No. 101-0105-00 Rev 5
Page 54
Kaleidescape Premiere Line Installation Guide
Physical Installation
5. Place the player and bracket over mounting holes.
6. Check that the mounting screws are the appropriate length. Do not use
the screw anchors for wood.
7. Use a #2 Phillips screwdriver to fasten bracket with the mounting screws
until the player and bracket are secure.
a. If mounting to drywall (hollow wall), or masonry (solid wall), drill a
3/16 in. (5 mm) hole for the screw anchors. Insert the anchors and
tap with a hammer until anchors are flush with the surface.
b. Tighten each screw with additional turns to expand the anchor inside
the wall. See
c. If mounting the power supply with the player, repeat steps for the
power supply bracket.
