Kaleidescape Part No. 101-0105-00 Rev 5
Page 20
Kaleidescape Premiere Line Installation Guide
Quick Start
On a 1U+ Movie Server the
right
light is green when a 1000Base-T
connection is established. The
left
light blinks green for activity.
On a 3U Server the
left
light is orange when a 1000Base-T connection is
established. The
right
light blinks yellow for activity.
The and 3U Server power supplies are universal input and operate on
any nominal line voltage between 100–240 V, 50–60 Hz.
3. Power on the server if front panel does not light.
a. 1U+ Movie Server – Press the
POWER
button on the front panel.
When the front panel is removed, press the
POWER
button along the
bottom edge of the chassis.
b. 3U Server – Open the front panel and press the
POWER
button.
If a disk cartridge is amber, or if the server’s front panel and power
button are amber, see
Troubleshooting Amber Lights on page 116
.
4. Open a web browser on a computer connected to the same network and
enter:
http://my-kaleidescape
(Windows) or
http://my-kaleidescape.local
(Mac) or
http://www.xxx.yyy.zzz
(Windows or Mac) where www.xxx.yyy.zzz is
the IP address of the server.
If a login page appears, enter the password and select
Login
.
5. The
HOME
page appears. Select the
SETTINGS
tab, and then select
Components
from the second row of tabs.
6. Confirm that the serial number listed for the server matches the serial
number printed on the physical server. (The serial number is located on
the back of the server and behind the front panel.)
7. Select the
Settings
button on the right and configure network and
control settings as applicable based on installation requirements. Select
OK
at the bottom of each tab to save.
8. When the system has more than one server, select
add a component
from the message at the top of the page and add additional servers. See
for more information.
Step 3 – Set Up the Players
1. Unpack and check against the packing list.
2. Mount the player according to the instructions for
