manualshive.com logo in svg

Kaleidescape premiere series, Installation Manual

Share
Download
Kaleidescape premiere series Installation Manual Download Page 86

Kaleidescape Part No. 101-0105-00 Rev 5

Page 86

Kaleidescape Premiere Line Installation Guide

System Configuration

Bitstream Pass-Through Mode

Select 

Bitstream pass-through

 to send 7.1-channel Blu-ray soundtracks 

over HDMI at the highest bandwidth possible (up to 192 kHz or 7.1 
channels) at the expense of other features.

The lossless audio formats available on Blu-ray quality movies, such as 
Dolby Atmos, Dolby TrueHD, DTS-HD Master Audio and 7.1-channel PCM, 
exceed the capabilities of analog and optical/coaxial audio outputs. 
These formats are only available over HDMI, and only when using the 

Bitstream pass-through

 mode. This setting turns off the analog and 

optical/coaxial outputs, and picture-in-picture audio cannot be heard. 

Table 2

 shows behavior with the 

Bitstream pass-through

 setting.

In 

Bitstream pass-through 

mode, optical/coaxial audio outputs are 

silent. 

Table 1 

Outputs with the Player Decode (Default) Audio Setting

Audio Output Format HDMI

Coax/Optical

Analog

Blu-ray quality movie

PCM up to 5.1 
channels

DTS up to 5.1 channels 
or PCM Stereo

Stereo

DVD quality movie

PCM up to 5.1 
channels

Source bitstream

Stereo

CD

PCM stereo

PCM stereo

Stereo

Table 2 

Outputs with the Bitstream Pass-through Audio Setting

Audio Output Format

HDMI

Coax/Optical

Analog

Blu-ray quality movie

Source bitstream

off

off

DVD quality movie

Source bitstream

off

off

CD

PCM stereo

PCM stereo

Stereo

Summary of Contents for premiere series
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands