manualshive.com logo in svg

Kaleidescape premiere series, Installation Manual

Share
Download
Kaleidescape premiere series Installation Manual Download Page 11

Kaleidescape Part No. 101-0105-00 Rev 5

Page 11

Kaleidescape Premiere Line Installation Guide

Overview

Video Cables

Players in the Premiere line have multiple video outputs including a 
combined audio/video HDMI output.

For more information about video installation, see 

Video and Audio Settings 

on page 80

.

Installation Locations

When installing a Premiere system, the following considerations must be 
addressed:

Customer requirements

Ventilation and clearance

Proper grounding

For detailed information on the best places to install components, see 

Physical Installation on page 25

. 

Space Planning 

All components in the Premiere line fit in standard 19 inch racks, and other 
than the M300 Player, ship with removable mounting brackets, or rack ears.

Note:

M300 players fit in a 19 inch rack when mounted on an optional Mini 
Player Rack-Mount Shelf (KSHELF-300) that can hold up to two mini 
players.

When planning the site, the following criteria must be met: 

• Components must have adequate ventilation
• All components require at minimum a 1 inch clearance in front and a 

2 inch clearance at the rear

• Front grilles must be unobstructed

Some components need more space if the rack has a front door.

• The 3U Server front panel opens outward from the top
• The 1U+ Movie Server has a removable front panel for disk cartridge 

access 

• M500 Players have disc trays that must be able to eject 

unobstructed

• DV700 and M700 Disc Vaults must be able to accept discs and eject 

discs from the front slot unobstructed

Summary of Contents for premiere series
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands