Kaleidescape Part No. 101-0105-00 Rev 5
Page 40
Kaleidescape Premiere Line Installation Guide
Physical Installation
4. Replace the front panel by aligning the metal tab at the bottom inside of
the panel with the slot in the front of the chassis. Press firmly and evenly
to snap the panel into place.
Connecting Components to the Network
Use the following procedures to connect components to the network.
Connect servers before connecting other components.
The two lights above the network connection indicate activity and the type of
connection.
Servers
1. Connect the Ethernet cable to the port labeled
NETWORK
on the back of
the server.
1U+ Movie Server: The
left
LED blinks green to indicate activity. The
right LED lights solidly green when a link is established.
3U Server: The
left
LED lights solidly orange to indicate when a link is
established. The
right
light blinks amber to indicate activity.
2. Plug the other end of the server Ethernet cable into a
1000Base-T
Ethernet switch
port.
The server has an RS-232 serial port labeled
CONTROL
reserved for
control systems. For more information, see
.
M500 Player
1. Make sure the server is connected to the network and powered on.
2. Connect the Ethernet cable to the port labeled
NETWORK
on the back of
the player.
