Kaleidescape Part No. 101-0105-00 Rev 5
Page 84
Kaleidescape Premiere Line Installation Guide
System Configuration
M-Class players can output the full luma range, but it causes video
mode changes between the onscreen user interface and movies,
and causes some disc menus and subtitles to appear incorrectly.
c. Configure
Detail Enhancement for HDMI Video
to influence how
sharp the edges of scaled video appear. (Option is only available if
HDMI is the primary video output.)
d. Enable
Deep Color for HDMI Video
only if all devices on the HDMI
video path support deep color. (Option is only available if HDMI is the
primary video output.)
e. Click
OK
to save settings.
Note:
The player does not need to be restarted. If changes are made
during playback, stop and restart the movie to see results.
Audio Settings for Premiere Line Players
Players in the Premiere line support Linear PCM (up to 7.1), Dolby Atmos
®
,
Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio
™
, DTS-
HD High Resolution Audio, DTS Digital Surround
®
and MPEG audio. However
some codecs can only be output as bitstreams.
Premiere line players can be used to watch DVD and Blu-ray quality movies
with nearly any audio receiver or processor. To hear lossless audio tracks
(for example, Dolby Atmos or DTS-HD Master Audio) from Blu-ray quality
movies without alteration, the A/V receiver or audio processor must be able
to decode these formats. When lossless audio is played using the
Bitstream
pass-through
setting, the coaxial, optical and analog audio outputs are
silent.
