manualshive.com logo in svg

Kaleidescape premiere series, Installation Manual

Share
Download
Kaleidescape premiere series Installation Manual Download Page 113

Kaleidescape Part No. 101-0105-00 Rev 5

Page 113

Kaleidescape Premiere Line Installation Guide

Control Systems

When selecting the touch screen for an installation, consider whether a 
video display is present and the technical capabilities of the touch panel. 
Installations can require more than one type of touch panel interface to 
provide the best control for every zone.

For more information, go to 

www.kaleidescape.com/support/control-systems. 

Keypad Control for Music

In-wall keypads are convenient for music zones that have no video display 
and no touch panel. There are two types of keypad control.

Keypad presets 

With keypad presets, a keypad can be programmed to play a music 
selection. Presets can be set to behave like car radio buttons. Press and 
hold to store, then press to recall.

Music collections 

With music collections, a keypad can be programmed so users can cycle 
through music selections within a music collection. This interface 
enables cycling through any collection by using the 

NEXT

 and 

PREVIOUS

 

buttons. 

An installer can program a keypad to control music on a Premiere system as 
long as the keypad can send a programmer-defined string over RS-232 or 
TCP/IP. Kaleidescape also provides keypad control modules for several 
manufacturers that can be downloaded from the Kaleidescape web site. 

Note:

The keypad must be able to send a programmer-defined string. Presets 
cannot be triggered via IR. 

For more information on keypad control commands, refer to the 

Kaleidescape System Control Protocol Reference Manual

 at 

www.kaleidescape.com/go/control-protocol

.

Summary of Contents for premiere series
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands