Remove the safety screen and the belt guard:
Fig. 72 Securing the belt guard at the generator
1
Hex-head screw
2
Washer
3
Safety screen
4
Generator belt
5
Belt guard
6
Square nut
7
Support for belt tensioner
8
Hexagonal nut
➤ Loosen the bolts on safety screen and belt guard and remove both protective devices.
10.7.8.1 Visual check for belt damage
1. Turn the pulley by hand and inspect the full length of the belt for splits, frays or any sign of
stretching.
Change the belt immediately if any damage or wear is found.
2. Re-attach the safety screen and the belt guard.
3. Reconnect the negative battery terminal.
4. Close the door.
10.7.8.2 Checking belt tension
Check belts when it is warm, not hot, to avoid length variations through temperature.
Checking belt tension on the drive belt:
A belt tension measuring device may be used to verify the belt tension. See the manufacturer's in‐
structions for operation.
The belt tension may also be checked manually if no tension measuring device is available.
10 Maintenance
10.7 Maintenance of Optional Items
No.: 9_5898 26 E
Operator manual Portable compressor
M 64
155
RAMIRENT
