![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/sigma-control-smart-m114/sigma-control-smart-m114_operators-manual_3191490091.webp)
Fig. 37 Setting the compressed air discharge pressure
1
Settings for compressed air discharge pressure
2
Setting
1. Press «Down» for a short time.
The "Setting compressed air discharge pressure" line is framed.
2. Press «Enter».
The frame flashes and thus signals that input is possible.
You can set the required compressed air discharge pressure.
3. Press the «Up» and/or «Down» keys to select the required pressure.
The set value for the compressed air discharge pressure is immediately active and remains
saved.
4. Press «Enter».
The frame stops flashing.
5. Press «Enter» for at least two seconds.
Jump back to the menu bar, the "Settings menu" symbol receives a black background.
or:
1. Press «Up» or «Down» until all lines of the Settings menu no longer have a frame.
2. Press «Enter» for just a moment.
Jump back to the menu bar, the "Settings menu" symbol receives a black background.
The modification of the pressure setting at the display can be blocked upon the entry of the
Customer password (password level 1). The last setting of the compressed air discharge
pressure is retained.
8.2.5 Shutting down the machine
Thermal overload of the turbocharger!
Abrupt stopping of the engine under load can cause a fault or damage to the turbo charger.
➤ Use the controller to normally shut down the machine; do not use the «QUICK STOP»
button to save time.
8
Operation
8.2
Starting and stopping
No.: 901765 05 USE
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
79