Carry out a freight securing:
■ National directives and regulations for securing loads should be followed.
■ Load securing is taken to mean that by full braking or sudden turning the load will not
slide, fall, roll or cause unnecessary noise. Generally accepted technical regulations
should be observed (e.g., in Germany: the VDI Directive 2700 ff).
■ Responsibility for properly secured loads falls on the driver, the vehicle keeper and the
carrier.
Use chocks, restrainers or timber balks for securing the load.
If necessary, use straps across the chassis and the towbar.
Fig. 98 Guys to secure the freight
1.
Straps can damage the bodywork.
Movement during transportation can damage the bodywork.
➤ Do not use straps over the bodywork.
➤ Use straps only over the chassis.
2. Always observe valid accident and safety regulations when transporting.
3. The loads must be secured against rolling, tipping, slipping and falling.
Contact KAESER Service with any questions regarding transporting or load securing.
KAESER accepts no liability and provides no guarantee for damage arising from incorrect
transport or insufficient or incorrect load securing provisions.
For hire, rental and trade fair plant, any transport safety devices used for the delivery must
also be used for the return transport.
Before shipment as air freight
The machine is designated as dangerous goods for air freight purposes; any disregard can result in
a heavy fine.
1.
Danger of fire or explosion from operating fluids/materials.
The machine incorporates an internal combustion engine.
➤ Any dangerous fluids/materials contained within the machine must be removed before
transport.
12 Decommissioning, Storage and Transport
12.2 Transport
240
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE
