10.2.2 Maintenance messages
Acknowledge the maintenance message
Precondition Maintenance has been carried out.
➤ Acknowledge the maintenance message as described in chapter 8.3.
Resetting the maintenance interval counter
Precondition Maintenance is carried out and
the maintenance message is acknowledged.
➤ Reset the maintenance timer as described in the separate user manual for the
SIGMA CONTROL SMART controller, chapter “Reset maintenance timer”.
10.3 Maintenance schedules
10.3.1 Logging maintenance work
The maintenance intervals given are those recommended for KAESER original components
with average operating conditions.
➤ In adverse conditions (e.g. oil and filter changes), perform maintenance work at shorter
intervals.
Adverse conditions are, e.g.:
■ poor fuel quality
■ high/low temperatures
■ a lot of dust
■ frequent use
➤ Adjust the maintenance intervals with regard to local installation and operating condi‐
tions.
➤ Logging all maintenance work.
This enables the frequency of individual maintenance tasks and deviations from our recom‐
mendations to be determined.
Further information A list is given in chapter 10.10.
10.3.2 Maintenance tasks after commissioning
The tables below lists maintenance tasks required after commissioning (initial start-up).
10 Maintenance
10.3 Maintenance schedules
98
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE
