![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/sigma-control-smart-m114/sigma-control-smart-m114_operators-manual_3191490021.webp)
The dimensional drawings also show the position of the following inlets and outlets:
■ Cooling air inlet
■ Cooling air outlet
■ Compressed air outlet
■ Exhaust
2.4 Chassis
2.4.1 Mass
The values shown are maximum values. Actual mass of individual machines are dependent on
equipment fitted (see machine nameplate).
Feature
Chassis
Stationary
Height adjustment
with
without
–
Actual total weight [lb]*
Permissible axle load [lb]
1900
1900
–
* Enter here for reference, the actual total weight taken from the nameplate.
Tab. 21 Mass of the machine
2.4.2 Tires
The tire's dimensions are shown on the side wall, see also Fig. 1.
Fig. 1 Example for Tire information on the side wall
1
Section, Tire side wall
2
Tire width [in]
3
Ratio cross-section height to cross-section
width [%]
4
Radial design
5
Rim diameter [in]
6
Light truck Tires (commercial)
7
Cross-section height
8
Cross-section width
Use the following table for detailed information regarding the tires of your machine:
Characteristic/marking
Value
Tire size
195 R 14C
Minimum and recommen‐
ded Tire pressure [psi]
4.5
2
Technical Data
2.4
Chassis
No.: 901765 05 USE
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
9