![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/sigma-control-smart-m114/sigma-control-smart-m114_operators-manual_3191490162.webp)
6. Check the position of the equaliser
2
on the brake rod
1
.
If the equaliser is perpendicular to the brake rod, the brake clearance is the same on each
wheel.
If the equaliser is oblique to the brake rod, adjust the brake rod.
7. Pull the parking brake lightly on and compare the braking force on the wheels.
If the braking force on the wheels is not equal, re-adjust brake system.
8. Replace the plug in the inspection hole.
A light rubbing sound when the wheels turn is permissible if it does not affect free turning.
Brake rod adjustment
Fig. 74 Brake rod adjustment
1
Brake rod
2
Equaliser
3
Brake cable (Bowden)
4
Spacer
5
Connecting sleeve
6
Hexagonal nut
7
Hexagonal nut
8
Axle abutment
9
Axle (cross-section)
1. To free the brake rod, remove the hexagon nut
2
at the equaliser
6
and loosen the sleeve
5
.
2. Clean and grease the brake rod threads.
3. Manually tighten the connecting sleeve.
4. Pull and release the parking brake three times.
5. Turn the wheel in forward direction and simultaneously tighten the connecting sleeve up to a
clearly experienced braking resistance.
You must still be able to manually turn the wheel in forward driving direction.
6. Screw the hexagon nut
6
onto the brake rod and lock the connecting sleeve.
Further information For more information, see the assembly illustration in chapter 13.6.3.
➤ Test by applying the brake a number of times.
10 Maintenance
10.8 Chassis maintenance
150
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE