![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/sigma-control-smart-m114/sigma-control-smart-m114_operators-manual_3191490114.webp)
Component:
Task
Daily
A250
A500
A1000
A2000
A3000
A36000
see chapter
Note
Chassis/bodywork
Check all screw connections,
hinges, locks, handles and snap
fasteners of the doors for wear
and secure fixing.
X
Grease the door hinges.
X
Carry out rubber sealing strip
maintenance.
X
Have lifting eye and fixings
checked.
X
KS; SW
Other maintenance tasks
Check all accessible screw fit‐
tings, pipes and clamps for wear
and tightness.
X
Check hoses for proper seating,
leaks and wear.
X
Have the plastic pipes and hose
lines been replaced.
X
KS; SW
Check that all electrical connec‐
tions are tight.
X
KS = call KAESER SERVICE; SW = contact specialised workshop
Tab. 75 Regular machine maintenance tasks
10.3.3.2 Maintenance schedule for options
➤ Carry out maintenance tasks according to the following schedule.
Option:
Task
Daily
A250
A500
see chapter
Note
Option ea, ec - tool lubricator:
Check the oil level in the tool lu‐
bricator.
X
Option da, db, dc, dd – cyclone separator:
Clean and check the dirt trap.
X
Options da, db, dc, dd – compressed air aftercooler:
Clean the cooler.
X
Option dd – filter combination:
EL = qualified electrician
KS = call KAESER SERVICE; SW = specialised workshop
10 Maintenance
10.3 Maintenance schedules
102
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE