8.2.2 Starting the machine
Notes concerning snow and ice
Considerable snow or ice may build up on the machine under low temperature conditions.
➤ Remove any snow and ice from the machine before operating.
As a safety measure, check the function of the «QUICK STOP» push button.
1.
«QUICK STOP» button latched!
The machine cannot be stopped quickly in an emergency.
➤ Check the function of the «QUICK STOP» button.
➤ Do not operate the machine if the «QUICK STOP» button does not operate.
2. Press the «QUICK STOP» button.
The «QUICK STOP» button cannot be pushed in or does not latch. Defrost the
«QUICK STOP» button.
3. Unlatch the «QUICK STOP» button
The «QUICK STOP» button still does not function after defrosting.
➤ Have the «QUICK STOP» button replaced.
Fig. 35 «Battery isolating switch»
1
«Battery isolating switch»
I – On
0 – Off
1. Open the right-hand access door.
2. Turn on the «battery isolating switch».
The battery is now connected to the machine's electrical system.
3. Close the door.
The machine can now be started.
8.2.3 Starting the machine
Serious damage to the engine from cold starting sprays!
Cold-start assists, such as ether or other sprays, can cause severe engine damage.
➤ Do not use cold start sprays.
Preparing the start
1. Open the control panel cover.
8
Operation
8.2
Starting and stopping
76
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
No.: 901765 05 USE
