![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/sigma-control-smart-m114/sigma-control-smart-m114_operators-manual_3191490067.webp)
6 Installation
6.1 Ensuring safety
Follow the instructions below for safe installation.
Warning instructions are located before a potentially dangerous task.
Disregard of warning instructions can cause serious injuries!
Complying with safety warnings
Disregard of safety warnings can cause unforeseeable dangers!
➤ Follow the instructions in chapter 3 “Safety and Responsibility”.
➤ Installation work may only be carried out by authorized personnel.
➤ Replace self-locking nuts that have been removed, do not reuse old ones. The nut is no longer
self-locking once it has been unscrewed.
Further information Details of authorized personnel are found in chapter 3.4.2.
Details of dangers and their avoidance are found in chapter 3.5.
6.2 Reporting Transport Damage
1. Check the machine for visible and hidden transport damage.
2. Inform the carrier and the manufacturer in writing of any damage found.
6.3 Fitting the tow bar
If the machine is shipped on a transport frame, it is necessary to dismantle the tow bar to save
space. The tow bar must be re-assembled before removing the transport frame.
Material Protective gloves
Wrench
Hard rubber hammer
Precondition The machine is standing firm and level.
The machine is switched off.
Pinch hazard!
Severe pinching injury to fingers is possible.
➤ Always wear protective gloves.
➤ Work with caution.
6
Installation
6.1
Ensuring safety
No.: 901765 05 USE
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
55