![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/sigma-control-smart-m114/sigma-control-smart-m114_operators-manual_3191490071.webp)
Fitting the jockey wheel of the non-adjustable tow bar:
Fig. 24 Fitting the jockey wheel of the non-adjustable tow bar
1
Overrun braking mechanism
2
Jockey wheel
3
Fastening screw
4
Washer
5
Hexagon nut (self locking)
1. Place a U-washer on each securing screw and insert each of these into the top four securing
holes on the jockey wheel mounting plate.
2. Raise the overrun braking mechanism and position such that the securing holes of the jockey
wheel mounting plate and the overrun braking mechanism coincide.
3. Push through the securing screws and push on the U-washers.
4. Secure the bolts with self-locking nuts.
6.4 Adjusting the chassis
Material Pliers
Hard rubber hammer
Precondition The machine is switched off.
The machine is disconnected from the towing vehicle and safely parked.
Pinch hazard!
Severe injury to fingers is possible if they become trapped in the adjusting mechanism.
➤ Always wear protective gloves.
➤ Work with caution.
6
Installation
6.4
Adjusting the chassis
No.: 901765 05 USE
Operator Manual Screw Compressor
M114 SIGMA CONTROL SMART
59
Option rc/ro/rs, rd/ro/rs