Kaba Saflok SYSTEM 6000, Reference Manual

Page: 108 / 132

System 6000
TM
Reference Manual_Section 6
© SAFLOK
Page 9 of 34
06/11
6.4 Display Keycards (continued)
Display Date
This Display Keycard provides the lock’s month, day, century and year date.
100’s 10’s 1’s
G Y R
Delimiter ‐ ‐ ‐
DATE/TIME/DST PROBLEM CODE (0 ‐ 4)* X
Delimiter ‐ ‐ ‐
MONTH (1 ‐ 12) X X
Delimiter ‐ ‐ ‐
DATE (1 ‐ 31) X X
Delimiter ‐ ‐ ‐
CENTURY (18 ‐ 21) X X
Delimiter ‐ ‐ ‐
YEAR (00 ‐ 99) X X
Delimiter ‐ ‐ ‐
*Date/Time/DST Problem Analysis. If one of the following problems occurs, refer to the Troubleshooting Section
of the Lock Installation Manual for handling Instructions:
0 = No Problem
1 = The lock is in Mode 0 or 1 and the date/time is not programmed
2 = The lock needs new DST information programmed in
3 = The lock has lost the time for some reason
4 = Clock has not been reset with 12 months
Display Auto Unlatch/Latch Status
This Display Keycard will indicate whether or not there is a problem with the lock’s automatic unlatch and latch.
100’s 10’s 1’s
G Y R
Delimiter ‐ ‐ ‐
AUTOLATCH STATUS (0 ‐ 5)* X
Delimiter ‐ ‐ ‐
*Autolatch Status Analysis. If one of the following problems occurs, refer to the Troubleshooting Section of the
Lock Installation Manual for handling instructions:
0 = Autolatch/Unlatch is Operational (No Problem)
1 = Lock is not functioning Properly or is not Programmed (Mode 0,1,3)
2 = Lock cannot perform Auto Unlatch/Latch because it has no motor
(Select V, ECU, RCU)
3 = The lock is not programmed to perform Auto Unlatch/Latch
4 = Lock should perform Auto Unlatch/Latch but cannot because its DST
Information needs reprogramming.
5 = Lock should perform Auto Unlatch/Latch but cannot because its clock
Date/Time Need to be reset.