Kaba Saflok SYSTEM 6000, Reference Manual, Page: 112 / 132

System 6000
TM
Reference Manual_Section 6
© SAFLOK
Page 13 of 34
06/11
6.4 Display Keycards (continued)
Low Battery Status
This Display Keycard tests for low battery indication and condition. If the lock’s batteries are low and a normal
keycard is used, the red light will flash ALTERNATELY with the normal green or yellow lights. After the batteries are
changed, this light pattern will continue until the lock has been opened once, or an ECU/RCU relay has been
activated once. The next time a keycard is used, the low battery indicator lights should not appear.
100’s 10’s 1’s
G Y R
Delimiter ‐ ‐ ‐
LOW BATTERY FLAG (0 = OK, 1 = LOW) X
Delimiter ‐ ‐ ‐
LOW BATTERY INPUT (0 = OK, 1 = LOW) X
Delimiter ‐ ‐ ‐
The Low Battery Flag indicates whether the low battery condition occurred recently.
The Low Battery input indicates whether the lock batteries are currently low.
If the Low Battery Flag indicates one red flash, and the Los Battery input indicates no red flash, the batteries were
recently low, but are no longer low. Use a Master Level Keycard to get green and red flashing lights. Then, try the
Display Keycard again.
If the Low Battery Input Flag indicates one red flash, the batteries are beginning to get low and should be replaced.
If no red lights occur with the Low Battery Flag or Low Battery Input, the batteries are fine.
Clock Run Test
This Display Keycard will indicate whether or not the lock’s clock is working.
100’s 10’s 1’s
G Y R
Delimiter ‐ ‐ ‐
INDICATES PROCESS IS RUNNING X
(Steady Yellow Light) (1 ‐ 64 Sec.)
Delimiter ‐ ‐ ‐
CLOCK WORKING STATUS (0 ‐ 1) X
Delimiter ‐ ‐ ‐
If the Clock Working Status does not indicate one red flash, the lock’s clock is not working and the circuit board
should be replaced.