Kaba Saflok SYSTEM 6000, Reference Manual

Page: 126 / 132

System 6000
TM
Reference Manual_Section 6
© SAFLOK
Page 27 of 34
06/11
PI Basic Errors in Program Cycle continued
Code Description
120 All Keys: Expiration Date and Time or New key Date and Time contain invalid values for month,
date, hours or minutes (example: 25:00, 4/31, etc.). Contact SAFLOK for assistance.
121 Standard, Special, PPK and SPK Keys: Key’s ID number equals 0 (invalid). Contact SAFLOK for
assistance.
122 Standard Keys: Lock level is non ‐ operating for this key’s type. The key does not belong to this
lock.
123 Standard and Special Keys: Key is not mastered into the lock. The key does not belong to this
lock.
124 Standard Keys: The lock level is Pass, but Pass Mastering key has not been programmed in yet so
key cannot be verified. Contact SAFLOK for assistance.
125 Standard Keys: Lock was in a dual key cycle awaiting another dual key, but this key does not
belong to a level with a dual key function. You must use another dual key after using the first
dual key.
126 Standard Keys: Lock is in Override Mode 3 and the PPK key used prior to this key did not have the
authorization to work with a Standard key. You must use a PPK key with proper authorization.
127 Standard Keys: Key does not have one of the 12 valid pass numbers required for the pass level.
128 Standard and Special Keys: Key is an old key; its new key date is earlier than the lock’s key data.
Replace the key with a current or new key.
129 Standard and Special Keys: Key is an old key; its new key time is earlier than the lock’s key data.
Replace the key with a current or new key.
130 Standard Keys: Key is an invalid key, lock level is batch and the key’s sequence number is invalid
(not equal to 1 ‐ 32). Contact SAFLOK for assistance.
131 Standard Keys: Key is an old key, lock level is batch and the key’s sequence number has already
been used. Replace key with an unused sequence.
132 Special Keys: key is an old key, its new key date and time is earlier than the lock’s key data.
Replace key with a current or new key.
133 Standard and Special Keys: Key is an old key, level has unlimited sequence range but key’s
sequence number is older than the lock’s key data. Replace key with a current or new key. Use a
re ‐ sequence key if necessary.
134 Standard and Special Keys: Key is an old key, level has limited sequence range (1 ‐ 15) but key’s
sequence number is older than the lock’s key data. Replace key with a current or new key. Use a
re ‐ sequence key if necessary.