JUMO 705003, Operating Manual, Page: 89 / 112

89
5 Configuration
5.14 Cloud gateway
Here the connection to the JUMO Cloud is configured (available as of system version 4). Before this, the
device must be configured as a data source in the JUMO Cloud.
NOTE!
The permanent live mode is usually used during startup; it should be deactivated after startup. This
avoids costs that may be incurred for the transmission of the data (e.g. in the mobile network).
Parameter Selection/data input Description
Connection to the
cloud Connection to the cloud server
Inactive No connection
Active The connection is active.
Cloud server Selection of the cloud server
JUMO Cloud The JUMO Cloud is used.
Individual settings are ignored.
Individual The cloud server is determined by an individual
URL.
Individual URL for
configuration
(as of system ver-
sion 05) Enter URL URL of the cloud server
If the JUMO Cloud is not used, a different URL can
be entered here.
Individual URL for
MQTT
(as of system ver-
sion 05) Enter URL URL of the cloud server (MQTT protocol)
If the JUMO Cloud is not used, a different URL can
be entered here.
Device ID Enter device ID ID used by the device (data source) to authenticate
itself to the cloud.
The device ID is automatically assigned during
configuration in the cloud.
Password Enter password Password used by the device (data source) to au-
thenticate itself to the cloud.
The password is automatically assigned during
configuration in the cloud.
Permanent live
mode In permanent live mode, the live data is perma-
nently sent to the cloud (see cycle time), regard-
less of the configuration in the cloud.
Inactive No permanent live mode
The transfer of live data depends on the configura-
tion in the cloud
Active The permanent live mode is active.
Cycle time for live
data [ms] 250 to 25000 Interval at which live data is sent to the cloud when
permanent live mode is active.