JUMO 705003, Operating Manual, Page: 69 / 112

69
5 Configuration
5 Configuration
5.1 General information
As a basic principle, the device can be configured on the device itself, as well as using the setup program
or the "JUMO Web Cockpit" web application. However, these configuration options differ in terms of the
function areas that can be configured.
The following table provides an overview of which function areas are configurable by which means (= X).
NOTE!
The functions "Hardware assistant" (for defining the hardware configuration for the system), "PLC appli-
cation" (for defining the start parameters and starting the programming system), and "Languages" (for
defining the project language, and exporting and importing languages) are only available in the setup
program.
If the configuration has been changed on the device, this change will not take effect until you confirm the
query "Save settings" using the "Menu/OK" key.
In the web application, selecting "Save" ensures the device applies a change that was made to the con-
figuration. The change is not applied if you select "Exit".
In the setup program, the changed configuration must be transferred to the device in order for the change
to take effect.
If applicable, the default settings are shown in
bold in the following tables.
Function area Device Setup program Web application
Device manager X
a
a
Some functions are not available.
X
a
X
System bus X X
Data carrier manage-
ment X X
Ethernet X X X
Web server X X X
Email X X
PLC configuration X X
PLC parameters X X
Programs X X
System status UI
(device display) X X X
Real-time processing X X
Datastore gateway X X
Cloud gateway X X
Wtrans gateway
(only for variTRON 300) X X
Node-RED X X
Batches X X