JUMO 705003, Operating Manual, Page: 83 / 112

83
5 Configuration
Program channel
Parameter Selection/data input Description
Number of sec-
tions 0 to 200 Number of program sections that the program gen-
erator is to process.
Program section 1 to Program section 200
Process step
(procedural step)
(available as of
system version x) 0 to 200 The process step specifies the limits of the section
time and defines which setpoint values are avail-
able.
Section time
(hh:mm:ss) 00:00:00 to 99:59:59 Duration of program section
As from system version x:
The section time must be within the limits specified
by the process step.
RS
(Repeat section)
Start section 1 to 200 Number of the program section that is to be repeat-
ed together with the following sections.
NoC
(Number of cy-
cles)
Number of cycles 0 to 999 Number of repetitions of a program section (or
multiple linked program sections)
Setpoint value 01
to Setpoint value
30 -1000000 to 1000000
The limits depend on the ad-
missible minimum and maxi-
mum setpoint values of the
program generator. Setpoint values in the program section
As from system version x:
Only the setpoint values approved in the process
step can be used.
Tol high -1000000 to 1000000
(
0 )
The limits depend on the ad-
missible minimum and maxi-
mum upper limit of the
tolerance band for the program
generator.
Upper limit value for tolerance band monitoring of
setpoint value 01
Tol low -1000000 to 1000000
(
0 )
The limits depend on the ad-
missible minimum and maxi-
mum lower limit of the
tolerance band for the program
generator.
Lower limit value for tolerance band monitoring of
setpoint value 01
Operating contact
01 to
Operating contact
32 Operating contacts in the program section
Off (FALSE) Operating contact is not active.
On (TRUE) Operating contact is active.