JUMO 705003, Operating Manual, Page: 46 / 112

4 Operation
46
4.3.7 Configuration
Configure the device (CPU) and modules and determine their parameters
The "Configuration" area comprises the following areas (device-specific example shown):
•
Device manager: Device settings (device language, start-up behavior, partition change), device des-
ignations, time zone/NTP, date and time, customer-specific linearization (as of system version 5)
• System bus: Master (settings relating to the system bus; see below), module... (module-specific con-
figuration parameters; see below)
• Data carrier management (as of system version 7): Use of network drives
• Ethernet: Configuration of the LAN interface concerned (e.g., IP address, DNS server)
• Web server: Activation, HTTP or HTTPS, port numbers
• Email: Settings for sending emails
• PLC configuration: Units for absolute and relative temperature values (for the PLC application), con-
figuration of program generators, analog and digital variables (as of system version 5)
• PLC parameters: Display of the configuration structures that were created using the CPV Editor
(CPVE)
• Programs: Creation of programs using the program editor (setpoint values, operating contacts)
• System status UI: screensaver (activation and waiting period)
• Real-time processing (as of system version 6): Configuration of data recording
• Datastore gateway (as of system version 6): Configuration of the connection to the database
• Cloud gateway: Configuration of the connection to JUMO Cloud (as of system version 4)
• Wtrans gateway (only for variTRON 300): Settings for using the JUMO Wtrans transmitters (as of
system version 5)
• Node-RED (as of system version 4): Activation of programming tool Node-RED
• Batches (as of system version 6): Configuration of batch reporting
Details can be found in the "Configuration" chapter.