
67
4 Operation
A user can be edited, and it can also be removed. Likewise, the user's password can also be changed.
The "addUser" function is used to create a new user.
NOTE!
Due to the restricted possibilities for displaying and entering data on the device display, users with the
right "SystemStatusUi" can only be assigned simple passwords. To prevent these passwords from being
cracked via the web application, these users must not also be given the right "WebUi".
Import configuration
A configuration file (.jcf) is selected and transferred to the device here.
Once the configuration has been successfully transferred, the device restarts.
Extract configuration
The configuration is extracted from the device and saved as a configuration file (.jcf) here.
Function activation
Extra codes are activated here.
Extra codes are additional functions which are usually subject to a fee.
NOTE!
The files for enabling the extra codes (also referred to as license files or FeatureResponse files) should
be stored after initial receipt in such a way that they are available again for transfer to the device after a
factory reset.
Firmware
The device's firmware is updated here.
For this purpose, switch the device to the status "Stop". Then select a firmware file (.raucb) and transfer
it to the device. Afterward, create a new hardware configuration for the system (connected modules) us-
ing the setup program and transfer it to the device.
As an option, a configuration file (.jcf) can also be selected and transferred to the device here.
Log list
Log entries are extracted from the device and listed here.
The information shown can be filtered by entry type (information, warning, error, event, audit trail mes-
sage, alarm, malfunction). It is also possible to run a full-text search.
Debug
Debug data is extracted from the device here.
The file containing the debug data (.jdf) can be saved locally on the PC and sent to the manufacturer for
analysis purposes.
Use of a USB flash drive
NOTE!
It is also possible to update the firmware, import and extract the configuration (import, export), and ex-
tract the debug data using a USB flash drive.
chapter 4.2.2 "Device menu", Page 33
4.4.6
File explorer
Files and subfolders located in the Shared Folder are displayed here.
Summary of Contents for 705003
