JUMO 705003, Operating Manual, Page: 78 / 112

5 Configuration
78
Names of operating contacts
Power off Behavior of the program generator when the pow-
er failure is over.
Abort The program is aborted; the program generator
enters basic status.
Continuation The program continues running from the point that
it was at when the power failed.
Standstill The program is stopped (program generator stays
in automatic mode).
The program can be continued or aborted by
means of operation.
Continuation at x % If the difference in the actual value (before and af-
ter the power failure) is less than or equal to x %,
the program continues running from the point that
it was at when the power failed. If this is not the
case, the program generator enters standstill.
Continuation at actual value The program continues running at the actual value;
consideration is given to whether the program pro-
file had a positive or negative slope at the time of
the power failure.
Start with time The program can be started at a specific time (en-
try of date and time by means of operation).
No Immediate program start (e.g., by means of opera-
tion or digital signal)
Yes Program start at a specific time
Actual-value dif-
ference 0 to 100 The maximum admissible difference between the
actual value before and after the power failure for
the program to continue running.
End signal (s) 0 to 32767 Length of the program end signal
Events
(Program start,
...) Activate the event message for the relevant event.
Off (FALSE) No event message
On (TRUE) The event is entered in the event list.
Event text Enter text (or use existing text) This text is entered into the event list in case of the
event.
Parameter Selection/data input Description
Parameter Selection/data input Description
Name of contact
01 to
Name of contact
32 Enter text (or use existing text) Designation of the operating contact concerned