JUMO 705003, Operating Manual, Page: 70 / 112

5 Configuration
70
5.2 Device manager
Device settings
Device designations
Time zone/NTP
Parameter Selection/data input Description
Device language Select language Language in which the texts are shown on the de-
vice display.
Texts that do not have a translation in the selected
language are displayed in English or German (or,
if applicable, in the so-called developer language).
Start-up behavior System status that is adopted by the device once
it switches on:
Run "Run" system status
Stop "Stop" system status
Last status Last system status before the switch-off
Partition change
after [x] start-up
errors 5 to 50 After [x] errors during the boot process, the device
boots from the secondary partition (backup parti-
tion).
Afterwards there is a one-time possibility to boot
from the primary partition again with REBOOT
SYSTEM. If this fails, a software update is re-
quired.
Possible errors during the boot process:
•
Error in the device software
• Interruption of the voltage supply
Parameter Selection/data input Description
Device name Enter text (or use existing text) Designation of the device
The device name is used in the web application, in
the setup program, and, if applicable, in other PC
programs. It can also be used by DeviceScan and
the CODESYS application, for example for identi-
fication purposes.
DNS name Enter text (or use existing text)
The DNS name must not be
used more than once in the
network. Name by which the device can be identified and
addressed in the network.
The name set per default is unique as it comprises
the product group number and the MAC address.
Parameter Selection/data input Description
Time zone Select time zone Time zone in which the device is operated.
NTP active The device's time settings can be synchronized
with a time server using the Network Time Protocol
(NTP).
Yes Synchronization is active.
No Synchronization is not active.