JUMO 705003, Operating Manual, Page: 38 / 112

4 Operation
38
4.3.2 Project map
Create project using individual functions
The functions are combined in a project folder known as a project map.
The following functions are available within a project:
•
Project management: Display the name and path of the project file, enter the designation and de-
scription of the project
• Hardware assistant for system bus: Define the hardware configuration for the entire system
• Wtrans hardware assistent (only for variTRON 300): Select Wtrans transmitters (wireless transmis-
sion of measured values)
• Configuration: Configure the device (CPU) and modules and determine their parameters
• PLC application: Determine the start parameters for the CODESYS PLC programming system, start
the PLC configuration process (CODESYS)
• PLC parameter definition (function is provided if the CPVE is installed): Determine the start param-
eters for the CPV Editor (CPVE), start the CPVE
• Languages: Select the project language and device languages, export and import languages (texts)
• Data transfer: Establish a connection to a device, data transfer to/from the device, import and export
the configuration
• Messages (as of system version 6): Display and act on project messages (acknowledge; further ac-
tions may be required)
You can access these functions using the tiles in the window and using the functions in the bar at the top
(also known as the "project bar"). Selecting the "Project map" function takes the user back to the over-
view of functions.