JUMO 705003, Operating Manual, Page: 35 / 112

35
4 Operation
Service
CAUTION!
The SSH password gives the user unrestricted access to the operating system (root privileges).
Changes at the operating system level can result in the device functions developed and tested by JUMO
being inadmissibly changed. JUMO accepts no liability for this.
 The user is responsible for all changes he makes at the operating system level.
Removable media
This menu item is provided if a USB flash drive has been connected.
4.2.3 User log-on
Logon
1) Press the "Menu/OK" key to open the device menu.
2) Switch to the submenu "User administration > Logon".
3) Select the user from the list and press the "Menu/OK" key to confirm.
4) Enter the password: Select the 1st digit by pressing the "Up" or "Down" key and press the "Menu/
OK" key to confirm.
5) Enter the subsequent digits of the password one after the other.
6) Once you have entered the last digit, press the "Menu/OK" key again.
Sub-menu 1 Sub-menu 2 Sub-menu 3
Device manager Activate debug interface (selec-
tion)
As of system version 6: An auto-
matically generated SSH pass-
word is stored in the event list
(valid until power off). ---
Certificate administration Remove certificates (selection) ---
Email Send email (selection) ---
Sub-menu 1 Sub-menu 2 Sub-menu 3
Remove hardware
Must be run before the USB flash
drive is removed! --- ---
Import configuration --- ---
Export configuration --- ---
Firmware update --- ---
Export debug data --- ---
Export license request
(as of system version 4) Functions (extra codes) that can
be enabled.
A separate request file (license
request) must be exported for
each function. ---
Import license file
(as of system version 4) If several functions are available,
they must be enabled one after
the other.
A separate response file (license
file) is required for each function. ---