ENGLISH
45
Step 1 – Frame
There are a total of 15 steel tubes for the frame. All parts with the same number are exchangeable and
have no right or left alignment
.
Join the parts together by inserting the smaller tube parts into the larger
ones. These form the contact points.
Fig. 1
1.
Lay out all the frame parts as shown in fig
.
1
.
2. Parts
-
Upper frame (4)
-
Upper frame with brackets for leg bases (3)
-
Leg base (5)
-
Vertical leg extension (6)
Step 2 – Base
1.
Insert all the vertical leg extensions (6) in the
leg bases (5).
Step 3 – Upper frame
1.
Two persons are needed for this stage of the assembly
.
One person lifts up the base from Step 2 to
a standing, vertical position and inserts the upper frame brackets (3) in vertical leg extensions on
the base
.
2.
The other person holds the other edge and inserts the brackets on that side in the base, see fig.3.
You should now have two base parts which are held together by an upper frame with brackets for
the leg bases
.