ENGLISH
48
NOTE!
It is important that the first four springs are uniformly placed round the frame in the correct holes
for the correct assembly of the rest of the bounce mat.
7.
Continue to fit the remaining (56) springs uniformly spaced round the frame.
8.
Fasten the springs in every 7th hole
.
-
In addition to the springs already fitted, there should be springs in the following holes:
7 22 37 52
9.
Now fasten springs in every other 3rd hole.
-
In addition to the springs already fitted, there should be springs in the following holes:
3 10 18 25 33 40 48 55
10.
Fasten the remaining springs.
NOTE!
If you notice that you have missed a hole, or a ring, release the relevant springs and recount.
Step 5 – Fitting the safety sign
1.
Fasten the safety sign
(8) on the trampoline
with a cable tie.
2.
Make sure that the
cable tie is sufficiently
long
.
It should reach
round the upper frame
so that it does not slip
off
.
Step 6 – Frame pad
WARNING
!
Never use the trampoline without frame pads. Tie the frame pads securely before using.
1. Place the frame pad over
trampoline (1), so that the springs
and steel frame are covered.
2.
Make sure that the frame pad
covers all the metal parts
.
3.
Spread out the straps
.
