Johnson Controls CICM008B21S, Service Manual

Page: 129 / 152

SM-18003
5-31
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
(66) Not Prepared (FE)
(67) Not Prepared (FF)
(68) Not Prepared (H1)
(69) Indication of Hot Start (H2)
When this function is set as “No Indication” (01), “HOT-ST” is not indicated on the wired controller.
(70) Not Prepared (H3)
(71) Not Prepared (H4)
(72) Not Prepared (J1)
(73) Not Prepared (J2)
(74) Run Indicator Color (J3)
This function is utilized to set the run indicator color.
(75) Not Prepared (J4)
(76) Not Prepared (J5)
(77) Not Prepared (J6)
(78) Not Prepared (J7)
(79) Eco-operation (J8)
This function is utilized to effectively optimize the setting temperature and provide energy saving.
When the setting temperature is changed during the air conditioning operation and while the operation
is started/stopped by ON/OFF button on the wired controller, the set temperature automatically returns
to (57/58) “Automatic Reset Temperature for Cooling/Heating (F5/F6)” as in the following figure.
However, the setting temperature is not automatically reset in the case that “Automatic COOL/HEAT
Operation” mode, or “Prohibiting Operation by Wired Controller” is set by the centralized controller.
Setting Conditions Color
00 Green
01 Red
NOTE:
The red run indicator is flashing during the alarm.
Setting
Temperature Change
Return to (57) Automatic Reset
Temperature for Cooling
STOP
Return to (58) Automatic Reset
Temperature for Heating
Operation Mode
* COOL
* DRY
* FAN
Operation Mode
* HEAT
Setting
Temperature Change
(80) Not Prepared (J9)
(81) Not Prepared (JA)
(82) Not Prepared (Jb)
(83) Not Prepared (K1)
(84) Not Prepared (K2)
(85) Not Prepared (K3)
(86) Not Prepared (K4)