SM-18003
5-35
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
(132) Not Prepared (r4)
(133) Not Prepared (r5)
(134) Not Prepared (r6)
(135) Not Prepared (r7)
(136) Not Prepared (r8)
(137) Not Prepared (r9)
(138) Not Prepared (rA)
(139) Not Prepared (rb)
(140) Not Prepared (S1)
(141) Not Prepared (S2)
(142) Not Prepared (S3)
(143) Not Prepared (S4)
(144) Not Prepared (S5)
(145) Not Prepared (S6)
(146) Not Prepared (S7)
(147) Not Prepared (S8)
(131) Setback Temperature Compensation (During card key removal, setpoint is setbacked) (r3)
This function is utilized to change the indoor temperature condition to Thermo-ON/OFF.
In case the setback operation is enabled and the card key is removed, setpoint is compensated and
fan operate at “LOW” speed.
By default,
Cooling: Se4
o
F
(+2.5
o
C
)
Heating: Setpoint -4
o
F
(-2.5
o
C
)
When the external signal is detected (card key is inserted), return to the original setting temperature.
Setting Condition
Actual Control Temperature
00 (Standard)
Wired Controller Setting Temperature (Indicated Value) +4
o
F (2.5
o
C)
01
Wired Controller Setting Temperature (Indicated Value) +5
o
F (3.0
o
C)
02
Wired Controller Setting Temperature (Indicated Value) +6
o
F (3.5
o
C)
03
Wired Controller Setting Temperature (Indicated Value) +7
o
F (4.0
o
C)
04
Wired Controller Setting Temperature (Indicated Value) +8
o
F (4.5
o
C)
05
Wired Controller Setting Temperature (Indicated Value) +9
o
F (5.0
o
C)
06
Wired Controller Setting Temperature (Indicated Value) +10
o
F (5.5
o
C)
07
Wired Controller Setting Temperature (Indicated Value) +1
o
F (0.5
o
C)
08
Wired Controller Setting Temperature (Indicated Value) +2
o
F (1.0
o
C)
09
Wired Controller Setting Temperature (Indicated Value) +3
o
F (1.5
o
C)
10
Wired Controller Setting Temperature (Indicated Value) +3
o
F (2.0
o
C)
Compensation for setback operation can be changed as shown in the table below.
Summary of Contents for CICM008B21S
