5-22
SM-18003
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
NOTES:
1. Wait at least 3 minutes from initial power ON to change the optional setting.
2. When changing “CF” setting (“Change of Louver Swing Angle”), restore the power supply or test the louver
swing a couple of times in the auto swing mode to validate the setting.
3. The optional settings are different according to the indoor and outdoor unit models.
Check to ensure if the unit has the optional setting or not.
4. The above optional functions with “X” mark at the individual setting can change the condition only when “All
Rooms” is selected in the Test Run Menu > Function Selection Menu.
5. Function selection items "q1" to "S8" are available only for indoor units and wired controllers with new
software applied. Check to ensure if the unit has the optional setting or not.
*1): The “02” setting may not be available according to the type of indoor unit.
*2): In case that the set temperature is changed and the temperature is kept for a specific time set by “F4”, it
automatically changes to the temperature set by “F5” or “F6.” (In case that the set temperature of “F5” and
“F6”is out of range, the upper or lower limit temperature is applied.)
*3): Applicable to fan, cooling and dry operation modes.
*4): Applicable to heating operation mode.
*5): Operation is stopped by pressing the “ ” (On/Off) button for 3 seconds.
*6): The sensor value at “C8” will be indicated. When the thermistor for wired controller is used, the average
value of the thermistor for wired controller and the thermistor for indoor inlet will be indicated.
*7): When the unit is restarted by the wired controller, the temperature automatically changes to the setting
temperature of “F5” or “F6”.
No.
Items
Optional Function
Individual
Setting
Setting
Condition
Contents
133
r5
Not Prepared
-
-
Not Used
134
r6
Not Prepared
-
-
Not Used
135
r7
Not Prepared
-
-
Not Used
136
r8
Not Prepared
-
-
Not Used
137
r9
Not Prepared
-
-
Not Used
138
rA
Not Prepared
-
-
Not Used
139
rb
Not Prepared
-
-
Not Used
140
S1 Not Prepared
-
-
Not Used
141
S2 Not Prepared
-
-
Not Used
142
S3 Not Prepared
-
-
Not Used
143
S4 Not Prepared
-
-
Not Used
144
S5 Not Prepared
-
-
Not Used
145
S6 Not Prepared
-
-
Not Used
146
S7 Not Prepared
-
-
Not Used
147
S8 Not Prepared
-
-
Not Used
Summary of Contents for CICM008B21S
