Johnson Controls CICM008B21S, Service Manual

Page: 90 / 152

MAINTENANCE
4-18
SM-18003
NOTES:
Remove the drain pan after removing drain water in the drain pan.
1. Remove the drain water in the drain pan after pulling out the rubber plug.
2. Insert the rubber plug into the hole after checking the above.
3. Remove the drain pan after removing four securing screws. Remove the drain pan carefully, since the
drain water may remain at the bottom of the drain pan.
4. Clean and dry the drain pan after removing it. Handle the drain pan carefully so as not to damage it.
4.3.2 Cleaning Procedure
Spread a vinyl sheet over the floor to protect furniture, etc. from cleaning water before this work.
No. Procedure Tool
1
Remove the optional decorative panel according to Section 4.2.3 "Removing
Optional Decorative Panel."
Phillips Screwdriver
2
Remove the electrical box after opening the electrical box cover and
disconnecting the connectors between the indoor and outdoor units and other
connectors according to Section 4.2.2 "Removing Electrical Box Cover."
Phillips Screwdriver
3
Remove the bell-mouth and fan according to Section 4.2.4 "Removing Turbo Fan
and Fan Motor."
Phillips Screwdriver
Adjustable Wrench
4 Remove the drain pan according to Section 4.2.6 "Removing Drain Pan." Phillips Screwdriver
5 Remove the float switch according to Section 4.2.9 "Removing Float Switch." Phillips Screwdriver
6
Remove the drain-up mechanism according to Section 4.2.8 "Removing Drain-up
Mechanism."
Phillips Screwdriver
TURN OFF all power source switches.