52 DePuy Synthes Power Tools Battery Power Line II User’s Manual
Care and Maintenance
Lubrication
Battery Oscillator II (530.710)
The following individual parts must be lubricated with
one drop of Synthes Special Oil (519.97):
1. Saw blade coupling
2. Locking knob for the saw blade quick coupling
3. Sliding sleeve for positioning the saw blade
(Figures 1a and 1b)
4. Trigger shaft
Pull the sliding sleeve back and put one drop of Synthes
Special Oil (519.97) on the exposed area (Figure 1a). Then
push the sleeve forward and put one drop of oil on the
other exposed area (Figure 1b). To lubricate push
the sleeve forwards and backwards several times. Then
pull back the sliding sleeve and rotate the saw head
several times.
Insert one drop of Synthes Special Oil (519.97) in the
battery casing buttons from the inside, after which the
buttons should be pressed several times (Figure 2).
Figure 1b
Figure 1a
1
2
4
3
3
Figure 2
Press release buttons
Press release buttons
